Nanhua LS 310C Dual Obstruction Light
Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light
Specifications
| Description | Parameter |
|---|---|
| Standard | Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810 |
| Vertical degree | ≥10° |
| Light source | High quality LED |
| Horizontal degree | 360° |
| LED color | Aviation red（Other color can be customized） |
| Flashing rate | 30FPM(20-60FPM/ |
| Operating voltage | AC110-240V/ DC48V (Other voltage can be customized) |
| Flashing duration | 150±20ms |
| Power consumption | 6W(Steady burning) |
| LED life | ≥80,000h |
| Intensity | ≥32.5cd |
| On/off level | 500Lux |
| Operating temperature | -40˚C ~ +70˚C |
| Relative humidity | 10% ~ 95% (no condensing） |
| IP Protection | IP65 |
| Material | Base：：Aluminum alloy，Housing: PC |
| Weight | 4.5kg |
Functions & Features
- Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required.
- Based on LED technology, low power consumption, and high efficiency.
- Lamp housing –Polycarbonate, with good anti-impact strength, thermal stability, high transmittance.
- Aluminum alloy base with the advantage of light weight and corrosion resistance.
- G3/4”pipe is available, ease of mount.
- with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.
- Built-in micro monitoring controller unit, when and if the service light fails the controller switch on the standby light automatically.
- Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
- With outputting alarm signal(optional).
- Extremely Reliable — Major Maintenance Cost Saving.
Mounting dimension（unit: mm）& Wiring Connection
Installation and operation
- Please check the supply voltage does comply with rated voltage of the lamp.
- Screw the lamp on G3/4’pipe of mounting bracket, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ005. Note that installation is fixed and reliable, so as not to fall.
- If the lamp is with photocell, please do not put photocell direct to nearby light. Meanwhile ensure that the photocell is not obstructed by nearby object.
- Open the connection box and connect the power wire, signal wire according to marking. Then remount the connection box.
- Switch on the power after check up. The light begins to work.
Adjustment of flashing rate
- Switch off the power.
- Unscrew the screws of housing and base.
- The flashing rate and adjusted code, please see as following:
-
- Screw the screws of housing and base.
- Power on, the light will work as your setting.
Dual light/Two lights switchover
- Switch off the power.
- The work model and adjusted code, please see as following
-
- Power on, the light will work as your setting.
Production Flow Chart
Pr
