Medium Intensity Aviation Obstruction light Nanhua ABC-7M
ABC-7M Medium intensity obstruction light for marking towers (Telecom, GSM), smokestacks, buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.
The enclosure of ABC-7M is made of die casting aluminum with powder coated finish, with the advantages of light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Light source consists of external long life LEDs, to ensure maximum life of the product.
The enclosure of ABC-7M is made of die casting aluminum with powder coated finish, with the advantages of light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Light source consists of external long life LEDs, to ensure maximum life of the product.
Specifications
| Description | Parameter |
|---|---|
| Standard | ICAO（ Annex）Type B; FAA-L864 |
| Light source | LED |
| LED color | Red（White optional） |
| Supply voltage | AC110V~AC240V/DC48V/DC24V（other voltage can be customized） |
| Power consumption | 25W(steady) /5W(30FPM) |
| Intensity | 2000±25﹪cd |
| Vertical degree | 3°min |
| Horizontal degree | 360° |
| Flashing rate | 30FPM(20/60FPM/steady customizable) |
| Flash duration | 150±20ms |
| LED lifetime | ≥100,000 hrs |
| On/off level | 50lux |
| Signal output | Passive dry contact |
| Temperature | -30˚C ~ +70˚C |
| Humidity | 10% ~ 95% (no condensing） |
| IP grade | IP65 |
| Material | Base：Aluminum, Housing：PC |
| Weight | 4.0kg |
Functions & Features
- Modular design and meets optics standard, compact size and high efficiency
- Based on LED technology, Extremely reliable — maintenance cost saving
- Resistant to Shock and Corrosion
- Self-contained wiring compartment—eliminates additional boxes
- Base material—aluminum;Reflector:ABS
- Housing–Polycarbonate, good anti-impact strength, thermal stability, high transmittance
- Combustibility rating：UL94V0
- Typical LED lifetime: ≥100, 000 hrs
- Auto output alarm signal when light was faulty (be customized)
Installation and Operation
- Unfasten two screws fixed on the nameplate and then remove the nameplate panel
- Insert the power cable from the gland box and then connect them to the corresponding terminals inside the lamp body（see following figure）
- Verify whether the power cables are well connected before power on
Mounting dimension（unit: mm）& Wiring Connection
Notice
- Check whether the power cables are connected correctly before power on
- Temperature rise inside the control box is normal phenomenon
- Please do not open any components inside by yourself
- This product is a sealed structure; Should not be tampered with by anyone other than registered installer
- Please use this product following this meanual
Production Flow Chart
