LED High Intensity Aviation Obstruction Light Nanhua LH856U
Specifications
| Description | Parameter |
|---|---|
| International Standard | ICAO（Annex）High intensity TypeA; FAA-L856 |
| Light source | LED |
| Color | White |
| Voltage | AC200V～AC240V |
| Horizontal degree | 120° |
| Vertical degree | 3°-7° |
| Flashing rate | 40 FPM |
| LED life | ≥100,000h |
| Power consumption | Day: 60W； |
| - | Twilight: 20W； |
| - | Night: 10W |
| Flash duration | Day, twilight: 10ms； |
| - | Night: 110ms |
| Intensity | Day: ≥210000cd（ICAO:200000±25%,FAA:270000±25%,Comply with ICAO and FAA standard） |
| - | Twilight: 20000cd±25% |
| - | Night: 2000cd±25% |
| On/Off level | Day: ≥500lux |
| - | Twilight: 50～500lux |
| - | Night: ≤50lux |
| Operating temperature | -40˚C ~ +55˚C |
| Humidity | 10% ~ 95% (no coagulation) |
| Ingress protection | IP65 |
| Anti-wind ability | 50m/s |
| Material | Shell: Aluminum ；Lens: Tempered glass |
| Weight | <10kg |
Functions & Features
- Based on LED technology and meets optics standard.
- LED technology, work long life time, extremely reliable and cost saving.
- Working temperature: -40℃ ~ +55℃，can be used in very harzard conditions.
- Tempered glass lens, good impact resistance, thermal stability and glossiness.
- Aluminum shell, shock resistance and corrosion resistance.
- Flash sychronous with built-in GPS mould based on UTC.
- Built-in power supply and control circuit, easy mounting.
Mounting dimension(unit: mm)
Wiring
Installation
- Ensure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.
- When install the light, do not install the photocell towards the light beam around, and also ensure the photocell is not covered by something.
- Make sure the power supply can match the rated power of light before connecting.
- Open the nameplate cover, connect power cable and earth wire to corresponding terminals through waterproof gland.
- Check whether the power cables are connected correctly before power on.
Note
- Ensure that the power connection part is correct before using.
- Please do not open any components inside when light is working.
- This product is a sealed structure,please do not open any components inside by yourself.
