Solar Marine Navigation Light Nanhua ML401A
Ideal for hazard marking, aquaculture, navigation, perimeter lighting & a host of other applications.
Specifications
| Description | Parameter |
|---|---|
| Light Characteristics | |
| Intensity | >40cd |
| Visible Range | >4nm |
| LED Available colors | Red, amber, green, blue, white |
| Vertical degree | >7° |
| Horizontal degree | 360 ° |
| Light source | LED |
| LED life | ≥100,000 hr |
| Electrical Characteristics | |
| Autonomy | >20 days（12hour darkness，12.5%duty cycle） |
| On/off level | 300 lux±100lux |
| Flashing rate | complies to IALA Recommendations, total 256 available flashing rate( steady burning，adjustable ) |
| Power Supply | |
| Solar module type | Monocrystalline silicon solar panel |
| Output | 6W*4 |
| Battery type | No maintenance sealed lead acid battery |
| Battery capacity | 12V/24 AH |
| Physical Characteristics | |
| Integrated housing | UV resistance PC, stainless steel 316 case |
| Waterproof | IP68 |
| Weight | 20 KG |
| Ambient temperature | -35℃ ~ +70℃ |
| Size | H:580mm, D:270mm |
| Mounting dimension | Base:230mm .200mm Noda distribute 4*M16 holes |
| Customized | External power or Infrared control |
Functions & Features
- Based on LED technology, and its color complies to IALA Recommendations E-200-1.
- Integrated design, enabling a rugged and completely waterproof seal capable of prolonged and deep immersion (IP68).
- PC housing，UV resistance, shockproof and corrosion proof. Housing adapts the circumference focus Fresnel Lense. The case is made of stainless steel 316.
- With birds pike.
- 256 kinds of flashing rate are available, comply with IALA.
- Intensity can be adjusted from 25%, 50%, 75% and 100% of total intensity.
- With photocell, and manual switch.
- With Steel wire to prevent falling during mounting and adjusting.
- With built in sealed lead acid battery, easy for replace.
- No RF-radiations, EMC Compliant.
- Extremely Reliable and cost saving.
Mounting diagram（Unit：mm）
Flashing rate adjustable and Intensity adjustable
Flashing rate and intensity adjustion
- unsnatch the screws and take off the housing. Circumgyrate stopper end to OPEN, open the stopper end, you will see manual switch, intensity adjusting switch and light adjustment switch.
- Switch adjustment : open, toggle switch towards the ON side; off, toggle the manual switch toward the OFF side. (Note：When in the ON state, only at ≤ 300 lx ± 100lx illumination environment, the light will work.)
-
Light adjustment : manual adjustment of the encoder SWA and SWB, each regulating group corresponds to one lighting mode.
corresponding 250 kinds of lights below annex, (6 lighting modes can be customized.)
Lighting Code Definition F fix FL Flashing in fixed time, for example: FL (2) 5.5 S flashes twice every 5.5 seconds Q Flashing VQ Quick flashing OC Bright and dark light, Lighting time longer than extinguish time. ISO Equal light, Lighting time is equal to the extinguish time LFL Long time, long flash
